Parameters

Material of processible coiled plate: Galvanized steel, Carbon

steel and Aluminium coils

Thickness of coiled plate: 0.2-1.0mm;

Width of coiled plate: 1250mm;

Line speed: 0-10m/min ;

Loading capacity:5T hydraulic;

Coil I.D: ф480-510mm; 

Coil O.D: ≤ф1400mm;

Diameter of leveling rollers: ф60

The distance between leveling rollers: 65mm

Material of leveling rollers:40Cr,  hardness:HRC52-60

Power: 440V three-phase electricity 60Hz;

Tolerance of diagonal error:≤±2mm/2000mm

Tolerance of length error: ≤±2mm/2000mm

Leveling rolls: 4 up, and 5 down

Cutting device height is the same as the double machine portable table height.

The electrical box is cantilever one unit, it can connect the electrical control box both side of the machine

The hydraulic station is within the main machine together, so forklift can move easily.

Hydraulic Control System

Ensure the using of hydraulic parts

The working pressure of the hydraulic system is 6.3-16Mpa

Hydraulic tank capacity is 80 liters

Electrical control system: Siemens PLC and touch screen

PLC control mode, It is controlled by touch screen. 

Spare Parts

Our display screen is touch screen, not text touch screen.

Sussman roll forming system: We will make the hand wheels at the feeding device to adjust feeding width, and we also make the wheels with the numbers then you know how to adjust right and left sides, also we made the rulers on the bedding, you can adjust the profile height and width according to the rulers.

Screw with numbers is to adjust material thickness easily, also with protecting cap also add laminating film device and felt to make the board flatter and smoother without scratches.

The  machine is equipped with a detection switch device, in case of emergency, emergency alarm, stop operation.